SuperCoat Nano Ceramic Coating 9H 20ML
£21.00
StorkCar SuperCoat is an easy-to-apply nano-ceramic coating that combines StorkCar technology with traditional coating methods.
StorkCar SuperCoat, applied to your vehicle, creates a protective layer against UV rays, harmful chemicals, bird droppings, and road salt. It provides a deep shine that revitalizes the paint color and offers long-lasting, highly hydrophobic properties.
WHY should you use StorkCar SuperCoat?
Thanks to its flexible beading time, it is easy and risk-free to apply.
It can be applied in either a single or double coat.
A single coat provides high durability, lasting up to 18 months.
It exhibits high resistance to chemicals.
Recommended for car maintenance enthusiasts.
How to apply StorkCar SuperCoat?
To obtain the best performance from the product, ensure that the temperature and relative humidity (RH) of the application area (+5°C – +30°C/ 41°F – 86°F/ 50% RH) are as close as possible to the recommended conditions. Avoid direct sunlight during application and only work on cool surfaces.
Wash your car thoroughly.
Apply clay if necessary.
After cleaning, apply a scratch remover polishing paste according to the physical condition of your vehicle's surface.
Once polishing is complete, wash the vehicle and ensure all application areas are completely dry before applying StorkCar SuperCoat.
Before using the product, prepare the surface using StorkCar T02 and dry it with a lint-free microfiber cloth.
Place the suede cloth on the sponge surface of the application wedge.
Gently shake the bottle before use.
Open the cap and pour the required amount of product onto the suede cloth.
2-3 mL of product is sufficient for 1 m².
Discard or replace the suede cloth after using it on 3-4 panels.
Do not work on areas larger than 1 m² at a time.
Gently spread the product over the surface with even movements.
When beading occurs (normally up to 1 minute), gently wipe away the excess product from the surface using a microfiber cloth with linear motions.
After wiping the surface, complete the final polishing process using a StorkCar microfiber cloth with circular motions.
A second coat can be applied after waiting 1 hour if desired.
Keep coated surfaces away from direct sunlight, various dirt, and water for 24 hours.
Please allow 48 hours for the nano-coating to fully dry and become resistant to chemicals before using any detergent-based wash.